WIRELESS ROUTER 5G INDOOR NEBULAFLEX ZYXEL FWA505-EU0102F SLOT SIM CARD-CAT20 DL FINO A 5GBPS, 1P LAN GBE, WIFI 6 AX1800

System specifications
IP networking: 
- Supports IPv4/IPv6 dual stack (NDP IPv6)
- DHCP Client/server
- Virtual Private Network (VPN) pass-through
- Supports NAT/NAPT
- Supports DMZ
- Multiple APNs
- Supports port forwarding
Routing: 
- Supports bridge and router modes
- Supports remote management under bridge mode
- Static/dynamic route setting
IP firewall: 
- DoS attack detection
- Supports SPI
- Application-level firewall (LAN to WAN such as FTP, HTTP, Telnet, Ping)
- Filters LAN MAC address
- Filters LAN IP address
Management: 
- Supports local/remote device management and firmware upgrade via TR-069 and web GUI
- PIN/PUK management
- APN management
- Operating frequency band selection
- CLI/SSH (local and remote SSH access)
- Supports UPnP IGD
- Supports web server API to support APPs
- Supports Zyxel Nebula app (iOS and Android) for easy installation and local management
WLAN feature: 
- Auto channel selection
- WiFi Protected Setup (WPS)
- WiFi Multimedia (WMM)
- WiFi-enabled devices: up to 64
- Security: none, WPA2-Personal, WPA/WPA2, WPA3
- MAC address filtering with 64 address supported
- Multiple SSIDs/hide SSIDs
- WLAN scheduling

5G NR interface
3GPP Release 15 standard-compliant
Supports DL 4×4 MIMO: n1/n3/n7/n38/n40/n41/n77/n78
Supports DL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Supports UL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Supports both NSA and SA modes: 
- FDD: n1/n3/n5/n7/n8/n20/n28/n77/n78
- TDD: n38/n40/n41
Data rates: 
- 5G SA: DL 4.7 Gbps; UL 2.5 Gbps
- 5G NSA: DL 3.7 Gbps; UL 1.5 Gbps
Output power: 
- Class 2 (26 dBm) for 5G NR n41/n77/n78
- Class 3 (23 dBm) for rest FDD/TDD NR bands

4G LTE interface
3GPP UE Category 19 standard-compliant
Supports DL 4×4 MIMO: B1/B3/B7/B38/B40/B41/B42/B43
Supports DL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Supports UL modulation QPSK, 16-QAM, 64-QAM, and 256-QAM
Supports frequencies: 
- LTE-FDD: B1/B3/B5/B7/B8/B20/B28/B32
- LTE-TDD: B38/B40/B41/B42/B43
Peak data rates: Max. DL 1.6 Gbps/UL 211 Mbps
Output power: Class 3 (23 dBm ±2 dBm) for rest FDD/TDD LTE bands

WiFi air Interface
Wireless standard: IEEE 802.11b/g/n/a/ac/ax
Wireless speeds: Link rates up to 1774 Mbps for 802.11ax DBDC
Internal WiFi antenna: Dual-band & concurrent 2x2 + 2x2
WiFi antenna gain: 
- ≤ 4 dBi for 2.4 GHz
- ≤ 5 dBi for 5 GHz

5G/4G antennas
Two TS9 connectors for external antennas
Four embedded omni-directional antennas
Antenna Spec (Peak Gain): 
- 700 MHz ~ 960 MHz: 2 dBi
- 1.4 GHz ~ 2.7 GHz: 5 dBi
- 3.3 GHz ~ 4.2 GHz: 5 dBi

Hardware interface
2x 100/1000 Mbps Ethernet RJ-45 LAN ports, LAN2 can be configured for Ethernet WAN port
2x external antenna connectors (TS9 type)
1x 3FF/Micro SIM card slot
1x power on/off button
1x WPS/WiFi on/off button
1x reset button
1x Int/Ext antenna switch
1x USB 2.0 host port for file sharing
LED indicators: 
- Power indication
- Signal strength
- Internet connection status
- WiFi AP status
- WPS status

Power consumption
24 W (peak)

Physical specifications
Item: 
- Dimensions (WxDxH): 103 x 103 x 222 mm (4.06” x 4.06” x 8.74”)
- Weight: 1145 g (2.53 lb.)
Packing: 
- Dimensions (WxDxH): 252 x 171 x 110 mm (9.92” x 6.73” x 4.33”)
- Weight: 2450 g (5.40 lb.)

Environmental specifications
Operating: 
- Temperature: -10°C to 40°C (14°F to 104°F)
- Humidity: 10% to 90% RH (non-condensing)
Storage: 
- Temperature: -30°C to 70°C (-22°F to 158°F)
- Humidity: 0% to 95% (non-condensing)

Certifications
CE
NCC
BSMI
NBTC Certification

Package contents
Power adapter
Ethernet cable 1.8 m 8P8C